Tuesday, June 28, 2011

Home » » TIP2955 for 78xx Current Booster

TIP2955 for 78xx Current Booster

Volt regulators such as the LM78xx series sometimes need to provide a little bit more current then they actually can handle. If that is the case, this circuit can help out. A power transistor such as the TIP2955 or similar can be used.
TIP2955 for 78xx Current Booster Circuit
The power transistor is used to boost the extra needed current above the maximum allowable current provided via the regulator. Current up to 1.5 A will flow through the regulator, anything above that makes the regulator conduct and adding the extra needed current to the output load. It is no problem stacking power transistors for even more current. Both regulator and power transistor must be mounted on an adequate heatsink.
78xx Pins

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.