Sunday, August 5, 2012

Home » » LS7220 Simple Electronic Combination Lock

LS7220 Simple Electronic Combination Lock

This is the circuit  of electronic combination lock based on IC LS7220. This circuit can be used to activate a relay for controlling (on/off) any device when a preset combination of 4 digits are pressed. 
LS7220 Simple Electronic Combination Lock Circuit
IC LS7220 Pin-Out
To set the combination Lock, connect the appropriate switches to pin 3,4,5 and 6 of the IC through the header.As an example if S1 is connected to pin 3, S2 to pin 4 , S3 to pin 5, S4 to pin 6 of the IC ,the combination will be 1234.This way we can create any 4 digit combinations.Then connect the rest of the switches to pin 2 of IC.This will cause the IC to reset if any invalid key is pressed , and entire key code has to be re entered.

When the correct key combination is pressed the out put ( relay) will be activated for a preset time determined by the capacitor C1.Here it is set to be 6S.Increase C1 to increase on time.

For the key pad, arrange switches in a 3X4 matrix on a PCB.Write the digits on the keys using a marker.Instead of using numbers I wrote some symbols!.The bad guys will be more confused by this.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.