Saturday, September 8, 2012

Home » » 1993-1998 VW Golf III 2.0L 8-valve B&M Short Shift System Instructions

1993-1998 VW Golf III 2.0L 8-valve B&M Short Shift System Instructions

This B&M Short Shift System has been designed to work on most 1993-1998 VW 2.0L 8-valve models. It has been engineered to greatly reduce shift throw and improve shift feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Short Shift System. Installation of the B&M Short Shift System can be accomplished by anyone with minimal mechanical experience.

INTRODUCTION
This B&M Short Shift System can be installed in less than an hour by carefully following the instructions. Read all instructions first to familiarize yourself with the parts, tools, and procedures. This kit contains all the parts necessary to install the shifter.


STEP 1. Park vehicle on level ground, apply parking brake, place shifter in neutral, and allow engine to cool.
STEP 2. Locate transmission shift linkage on the transmission in the engine compartment (see arrow)
STEP 3. Unclip pins a and remove change rod b.
TOOL: Needle Nose Pliers G (optional).


Download


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.